Fcc And Ic Regulatory Statements - Laird BL600-SA Hardware Integration Manual

Single mode bluetooth low energy (ble) module
Hide thumbs Also See for BL600-SA:
Table of Contents

Advertisement

BL600-Sx Hardware Integration Guide
Single Mode BLE Module
Table 21: Recommended Maximum and minimum temperatures
Specification
Temperature Inc./Dec. Rate (max)
Temperature Decrease rate (goal)
Soak Temp Increase rate (goal)
Flux Soak Period (Min)
Flux Soak Period (Max)
Flux Soak Temp (Min)
Flux Soak Temp (max)
Time Above Liquidous (max)
Time Above Liquidous (min)
Time In Target Reflow Range (goal)
Time At Absolute Peak (max)
Liquidous Temperature (SAC305)
Lower Target Reflow Temperature
Upper Target Reflow Temperature
Absolute Peak Temperature
9 FCC
IC R
AND
EGULATORY
Model
US/FCC
BL600-SA
PI4BL600
BL600-SC
PI4BL600
BL600-ST
PI4BL600T
Important: The BL600-ST holds a limited modular approval for the U.S and Canada markets. To ensure
regulatory compliance when integrating the BL600-ST into a host device, it is necessary to
follow the design implementation requirements in this manual so the BL600-ST modular
certification can carry over to the host device. The RF trace path from the BL600-ST to the
approved antenna must be equivalent to what was approved for use by Laird. If these layout
requirements cannot be met, the OEM will need to either seek a new FCC/ IC approval for their
device or seek a Class 2 Permissive Change through Laird Technologies which adds the new
antenna layout to the BL600-St approval. Contact Laird Technologies for further guidance.
The BL600-SA and BL600-SC hold full modular approvals. The OEM must follow the regulatory guidelines and
warnings listed below to inherit the modular approval.
PART #
FORM FACTOR
BL600-SA-XX
Surface Mount
BL600-SC-XX
Surface Mount
BL600-ST-XX
Surface Mount
*Last two slots "XX" in Part # are used for production firmware release changes. Can be values 01-99, aa-zz
The BL600 family has been designed to operate with the antennas listed below with a maximum gain of 2.21
dBi. The required antenna impedance is 50 ohms.
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
Value
1~3
2-4
.5 - 1
70
120
150
190
70
50
30
5
218
240
250
260
S
TATEMENTS
CANADA/IC
1931B-BL600
1931B-BL600
1931B-BL600T
TX OUTPUT
ANTENNA
4dBm
Ceramic
4dBm
IPEX MHF4
4dBm
Trace Pad
43
Unit
°C / Sec
°C / Sec
°C / Sec
Sec
Sec
°C
°C
Sec
Sec
Sec
Sec
°C
°C
°C
°C
CONN-HIG-BL600

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bl600-scBl600-st

Table of Contents