Page 1
BTM420/421 DATA MODULE USER MANUAL VERSION 3.0 Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 www.lairdtech.com/wireless...
BTM420/421 ® Bluetooth Data Module EVISION ISTORY Revision Date Description Approved By 22 June 2010 Initial Release Jonathan Kaye 28 May 2012 Changes and Revisions Jonathan Kaye 04 Jan 2013 Formatting, New Hardware Diagrams, FCC Jonathan Kaye Statement updates Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com...
Operating Parameters ..........................8 Voltage Specifications ..........................9 FCC Regulatory Statements ........................10 BTM420 FCC and Industry Canada Statements ..................10 BTM421 FCC and Industry Canada Statements ..................11 EU Declaration of Conformity – BTM420 ....................12 EU Declaration of Conformity – BTM421 ....................13 Mechanical Drawings ..........................
Controller Subsystem Products. This allows designers to integrate them existing pre-approved Bluetooth Host and Profile subsystem stacks to gain a Bluetooth END product approval for their product. A low cost developer’s kit is available for prototyping. This ensures that the choice of Laird Technologies Bluetooth modules guarantees the fastest route to market.
Class 2 Frequency 2.402 – 2.480 GHz Channels 79 channels Frequency Hopping Adaptive Frequency Hopping Max Transmit Power +4 dBm at antenna pad – BTM420 +4 dBmi (TBC) from integrated antenna – BTM421 Receive Sensitivity -84dBm Range Data Transfer Rate Up to 2.1 Mbps...
Surface Mount Pads External Antenna Pad for 50 Ohm antenna – BTM420 Physical Dimensions 12.5 mm x 18.0 mm x 3.4 mm – BTM420 12.5 mm x 24.0 mm x 3.4 mm – BTM421 Weight 3 grams Environmental Operating Temperature -30°C to +70°C...
I/O for host Unused Unused See note 3 Unused See note 3 Unused See note 3 See note 3 ANT (BTM420) Antenna connection (50 ohm matched) See note 3 See note 3 Unused See note 3 Unused See note 3 Unused...
BTM420/421 ® Bluetooth Data Module Signal Description Voltage Specification GPIO1 / UART_RI I/O for hose Unused Unused USB D- VUSB USB D+ VUSB Unused Unused Unused Unused pins may have internal connections and must not be connected. Reset input is active low. Input is pulled up to VDD_IN via 22k. Minimum reset pulse width is 5 ms.
≤ 60/f(GHz) i.e. 25 mW for a 2.4 Ghz device. The Maximum Power Exposure for the BTM420 has been evaluated and found to comply with the low power threshold for an uncontrolled environment.
BTM420/421 ® Bluetooth Data Module BTM421 FCC and Industry Canada Statements The user manual must show the following statements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration: We, Laird Technologies, declare under our sole responsibility that the essential radio test suites have been carried out and that the above product to which this declaration relates is in conformity with all the applicable essential requirements of Article 3 of the EU Directive 1995/5/EC, when used for its intended purpose.
Declaration: We, Laird Technologies, declare under our sole responsibility that the essential radio test suites have been carried out and that the above product to which this declaration relates is in conformity with all the applicable essential requirements of Article 3 of the EU Directive 1995/5/EC, when used for its intended purpose.
BTM420/421 ® Bluetooth Data Module ECHANICAL RAWINGS BTM420 Mechanical Details Note: An area of 1.5 mm around the module should be reserved as a keep-out area. Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com Americas: +1-800-492-2320 www.lairdtech.com/bluetooth Europe: +44-1628-858-940 Hong Kong: +852 2923 0610...
BTM420/421 ® Bluetooth Data Module BTM420 Mechanical Details Note: An area of 1.5 mm around the module should be reserved as a keep-out area. Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com Americas: +1-800-492-2320 www.lairdtech.com/bluetooth Europe: +44-1628-858-940 Hong Kong: +852 2923 0610...
DO NOT WARNING: Test point dimensions are for reference only. make electrical connections to these test points, this will void the warranty. Laird does not recommend routing on the top layer underneath the module. Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com...
BTM420/421 ® Bluetooth Data Module BTM421 Mechanical Details Note: An area of 1.5 mm around the module should be reserved as a keep-out area. Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com Americas: +1-800-492-2320 www.lairdtech.com/bluetooth Europe: +44-1628-858-940 Hong Kong: +852 2923 0610...
BTM420/421 ® Bluetooth Data Module BTM421 Mechanical Details Note: An area of 1.5 mm around the module should be reserved as a keep-out area. Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com Americas: +1-800-492-2320 www.lairdtech.com/bluetooth Europe: +44-1628-858-940 Hong Kong: +852 2923 0610...
BTM420/421 ® Bluetooth Data Module BTM421 Mechanical Details Note: An area of 1.5 mm around the module should be reserved as a keep-out area. Embedded Wireless Solutions Support Center: Laird http://ews-support.lairdtech.com Americas: +1-800-492-2320 www.lairdtech.com/bluetooth Europe: +44-1628-858-940 Hong Kong: +852 2923 0610...
WARNING: Test point dimensions are for reference only. make electrical connections to these test points, this will void the warranty. Laird does not recommend routing on the top layer underneath the module. The Development Kit Schematics for this product can be accessed from the following link: Development Kit Schematics –...
ENERAL OMMENTS All information in this document is subject to change. Please check with Laird Technologies for the latest information before commencing a design. If in doubt, ask. Refer to the schematic BTDMD-R-001.pdf for the Development Kit on the following two pages for examples of typical pin connections.