Table of Contents
Advertisement
BT800 Hardware Integration Guide
Version 0.2
15 FCC
IC R
AND
EGULATORY
Model
US/FCC
BT800
SQGBT800
BT810
SQGBT800
BT820
SQGBT800
BT800-ST
SQGBT800
The BT800 family has been designed to operate with the antenna listed below having a maximum gain
of 0.5 dBi. The required antenna impedance is 50 ohms.
Item
Part Number
1
AT3216-B2R7HAA
15.1
Documentation Requirements
In order to ensure regulatory compliance, when integrating the BT800 into a host device, it is necessary
to meet the documentation requirements set forth by the applicable regulatory agencies. The following
sections (FCC, Industry Canada, and European Union) outline the information that may be included in
the user's guide and external labels for the host devices into which the BT800 is integrated.
FCC
Note: You must place "Contains FCC ID: SQGBT800" on the host product in such a location that it
can be seen by an operator at the time of purchase.
User's Guide Requirements
The BT800 complies with FCC Part 15 Rules for a Modular Approval. To leverage Laird's grant, the
conditions below must be met for the host device into which the BT800 is integrated:
1.
The antenna is installed with 20 cm maintained between the antenna and users.
2.
The transmitter module is not co-located with any other transmitter or antenna that is capable
of simultaneous operation.
As long as the conditions above are met, further transmitter testing is typically not required. However,
the OEM integrator is still responsible for testing its end-product for any additional compliance
requirements required with this module installed, such as (but not limited to) digital device emissions
and PC peripheral requirements.
IMPORTANT!
In the event that the three conditions above cannot be met (for example certain device
configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
When using Laird's FCC grant for the BT800, the integrator must include specific information
in the user's guide for the device into which the BT800 is integrated. The integrator must not
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
CANADA/IC
3147A-BT800
3147A-BT800
3147A-BT800
3147A-BT800
Mfg.
Type
ACX
Ceramic
34
Gain (dBi)
0.5
CONN-GUIDE-BT800_v0_2
Advertisement
Table of Contents
