Laird BL600-SA Hardware Integration Manual page 3

BL600-Sx Hardware Integration Guide
Single Mode BLE Module
Version Revision Date
1.9 11 June 2014
2.0 2 July 2014
2.1 14 July 2014
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
Change History
Note on added coming out from Deep Sleep to Standby Doze through

GPIO signal through the reset vector.
New function to detect GPIO change with no current consumption, so

UART closed but still able to detect for incoming data and be woken up
so that the UART can be re-opened at the expense of losing that first
character.
Note that SIO_7 and AutoRUN (SIO_28) are not both high (externally),

otherwise cannot load
Note on each module GND pin that must be connected to host PCB

GND.
Updated BT SIG information
Important information on pin 22 (reset) and pin 23 (SWDCLK).
Updated SIO VIL max value in table 5
smart BASIC application script.
3 CONN-HIG-BL600