Table of Contents
Advertisement
BL600-Sx Hardware Integration Guide
Single Mode BLE Module
Categories
Antenna Options
Physical
Environmental
Miscellaneous
Development Tools
Approvals
Note 1:
DSR, DTR, RI, and DCD can be implemented in the
Note 2:
With I2C interface selected, pull-up resistors on I2C SDA and I2C SCL MUST be connected
externally as per I2C standard.
Note 3:
SPI interface (master) consists of SPI MOSI, SPI MISO and SPI CLK. SPI CS is created by customer
using any spare SIO pin within their
Note 4:
BL600 module comes loaded with
smart
with any
use). Laird provides many sample
Additional BLE services being added every quarter.
smart
Note 5:
BASIC runtime engine firmware v1.2.54.0(Jun2013) and subsequent versions, the internal
DCDC convertor was switched off on recommendation from the chipset provider until future
notice.
Note 6:
Measured with BL600-Sx-04.
Deep Sleep current for BL600-Sx-02 and BL600-Sx-03 ~1000nA (typical).
Standby Doze current for BL600-Sx-02 and BL600-Sx-03 Standby Doze current 3.5uA (typical).
Note 7:
PWM output signal has a frequency and duty cycle property. PWM output is generated using
32-bit hardware timers. The timers are clocked by a 1MHz (1uS period) clock source.
Trade-off PWM output frequency with resolution. For example:
PWM output frequency of 500kHz (2uS) results in resolution of 1:2
PWM output frequency of 100kHz (10uS) results in resolution of 1:10
PWM output frequency of 10kHz (100uS) results in resolution of 1:100
PWM output frequency of 1kHz(1000uS) results in resolution of 1:1000
Refer to the
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
Feature
Internal
External – Option 1
External – Option 2
Dimensions
Weight
Operating
Storage
Lead Free
Warranty
Development Kit
Bluetooth®
FCC / IC / CE / MIC
smart
smart
BASIC application script (as that is dependent on customer end application or
smart
smart
BASIC user manual for details.
Implementation
Ceramic chip monopole antenna – on-board
BL600-SA
Dipole antenna (with IPEX connector)
Dipole PCB antenna (with IPEX connector)
Connection via IPEX MH4 – BL600-SC
Dipole antenna (with RSMA connector)
Connection via Trace Pads – BL600-ST
19 mm x 12.5 mm x 3 mm
<1 gram
-25 ˚C to +75 ˚C
(VCC 1.8V-3.6V)
-40 ˚C to +85 ˚C
(VCC 3.3V+/-10%)
-40 ˚C to +85 ˚C
Lead-free and RoHS compliant
1 Year
Development Kit DVK-BL600-Sx and
Free Software Tools
End Product Listing (EPL)
All BL600 Series
smart
BASIC application.
BASIC application script allowing multi-dropping.
BASIC runtime engine FW, but does not come loaded
BASIC application scripts covering the services listed.
9
CONN-HIG-BL600
Advertisement
Table of Contents
