Programming Setting - Weco Power Pulse 400 Software Update Manual

Cod.006.0001.1700
02/09/2016 v1.1
ENGLISH
1.4

PROGRAMMING SETTING

3. Enter the number of the USB SERIAL CONTROLLER port displayed
previously in the DEVICE MANAGER window in the VIA COM-PORT
6. Select MB91F364 in the DEVICE TYPE drop-down menu.
8/18
field.
3. Start the previously installed FLASHPRG program by double left-
clicking on the following icon:
The FLASHPRG program window will appear.
4. Type the number 500 in the NO. OF ATTEMPTS field.
5. Type the number 115200 in the PROG BAUDRATE field.