Wf-104: Circuit Board 050.0001.0078 - Weco Power Pulse 400 Software Update Manual

Cod.006.0001.1700
02/09/2016 v1.1
ENGLISH
2.2.2

WF-104: CIRCUIT BOARD 050.0001.0078

1. Disconnect the unit from the mains power supply.
2. Connect communications cable P/N 022.0002.0152 to connector CN2 on circuit board P/N 050.000x.0078.
With circuit board P/N 050.0001.0078 insert cable P/N 022.0002.0152 using caution to ensure the tab of the connector is facing the flat cable
Communication cable P/N 022.0002.0152
Circuit board P/N 050.0001.0078
12/18
INFORMATION
and that all the pins are inserted.
CN2: Programming connector for the motor circuit board.
(For programming with the following software:
WF104_COM2_..._.mhx)
Circuit board P/N 050.0002.0078