Circontrol Post eVolve Series Installation Manual page 14

Post eVolve Series Installation Manual
5
A
1. Use provided key in order to open the unit.
2. Pull outward the Tamper switch* to operate the charge point.
(*) Tamper Switch: The Charge Point has a security switch (antitamper protection) installed that
will avoid any charging session if the doors are opened.
It has three positions.
1. Operative postition: The charge point is closed.
2. Error position: The charge point is opened without supervision.
3. Mantenance position:The charge point is opened under mantenance (Pulling otward the
tamper switch).
12
Opening
1 2