Micro Pdf417 Set Length 1 - Datalogic DSM0400 Product Reference Manual

Enter/Exit Programming Mode

Micro PDF417 Set Length 1

Specifies one of the bar code lengths for Micro PDF417. Length 1 is the mini-
mum label length if in
Length Mode. Length includes the bar code's data characters only. Characters
can be set from 0001 to 0366 characters (pad with zeroes) in increments of 01.
Any value greater than 0366 will be considered to be 0366. Always use four
digits (e.g.: scan the barcodes '0', '0', '0', '2' for setting length = 2). For more
detailed programming instructions see, "Set Length" on
Select Micro PDF417 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
196
Variable Length
0001 = Length 1 is 1 Character
DEFAULT
Mode, or the first fixed length if in Fixed
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix C
acters in
ter(s). End by scanning the ENTER/EXIT bar code again.
DSM0400 Fixed Mount Area Imager Bar Code Reader
Chapter 4, References.
representing your desired charac-
CANCEL