Code 39 Set Length 2 - Datalogic DSM0400 Product Reference Manual

Code 39 Set Length 2

This feature specifies one of the barcode lengths for Code 39. Length 2 is the
maximum label length if in
length if in
data, and full-ASCII shift characters. The length does not include start/stop
characters. For more detailed programming instructions, see "Set Length" on
Chapter 4,
Table 2
Table 2. Code 39 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix C
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length on page 93
Fixed Length on page 93
References.
provides examples for setting Length 2.
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Mode, or the second fixed
Mode. Length includes the barcode's check,
07 Characters 15 Characters
'0' and '7' '1' and '5'
CANCEL
50 Characters
'5' AND '0'
95