Qr Code Set Length 2 - Datalogic DSM0400 Product Reference Manual

Enter/Exit Programming Mode

QR Code Set Length 2

This feature specifies one of the bar code lengths for
page
the second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes). Always use
four digits (e.g.: scan the barcodes '0', '0', '0', '2' for setting length = 2). For
more detailed programming instructions see, "Set Length" on
ences.
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
200
198. Length 2 is the maximum label length if in Variable Length Mode, or
DEFAULT
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix C
acters in
ter(s). End by scanning the ENTER/EXIT bar code again.
Length 2 is 7,089 Characters
DSM0400 Fixed Mount Area Imager Bar Code Reader
QR Code Length Control on
Chapter 4, Refer-
representing your desired charac-
CANCEL