Micro Qr Code Set Length 1 - Datalogic DSM0400 Product Reference Manual

Micro QR Code Set Length 1

Specifies one of the bar code lengths for Micro QR Code. Length 1 is the mini-
mum label length if in
Length Mode. Characters can be set from 0001 to 0035 characters in incre-
ments of 0001 (pad with zeroes). Always use four digits (e.g.: scan the barcodes
'0', '0', '0', '2' for setting length = 2). For more detailed programming instruc-
tions see, "Set Length" on
Select Micro QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
Chapter 4,
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Mode, or the first fixed length if in Fixed
References.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix C
acters in representing your desired charac-
ter(s). End by scanning the ENTER/EXIT bar code again.
CANCEL
203