The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the reader will not read Datalogic 2 of 5 barcodes.
DEFAULT
Datalogic 2 of 5 = Enable
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Data-
logic 2 of 5 check character.
DEFAULT
Datalogic 2 of 5 Check Character Calculation = Enable
Product Reference Guide
DATALOGIC 2 OF 5
Datalogic 2 of 5 Check Character Calculation = Disable
Enter/Exit Programming Mode
Datalogic 2 of 5 = Disable
125