Code 128 Set Length 1 - Datalogic DSM0400 Product Reference Manual

Enter/Exit Programming Mode

Code 128 Set Length 1

Specifies one of the barcode lengths for Code 128. Length 1 is the minimum
label length if in
Fixed Length on page 93
only. The length can be set from 1 to 80 characters. For more detailed pro-
gramming instructions, see "Set Length" on
Table 3
Table 3. Code 128 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix C
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
104
Variable Length on page 93
Mode. Length includes the barcode's data characters
provides some examples for setting Length 1.
EXAMPLES
01 Character
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Mode, or the first fixed length if in
Chapter 4,
07 Characters 15 Characters
'0' and '7' '1' and '5'
DSM0400 Fixed Mount Area Imager Bar Code Reader
References.
80 Characters
'8' and '0'
CANCEL