Code 128 Set Length 2 - Datalogic DSM0400 Product Reference Manual

Code 128 Set Length 2

This feature specifies one of the barcode lengths for Code 128. Length 2 is the
maximum label length if in
length if in
characters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore
this length (only one fixed length). For more detailed programming instruc-
tions, see "Set Length" on
Table 4
Table 4. Code 128 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix C
5 Scan ENTER/EXIT PROGRAMMING MODE
.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Fixed Length on page 93
Chapter 4,
provides examples for setting Length 2.
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
DEFAULT
80 = Length 2 is 80 Characters
Variable Length on page 93
Mode. Length includes the barcode's data
References.
07 Characters
'0' and '7'
Enter/Exit Programming Mode
Mode, or the second fixed
15 Characters 80 Characters
`1' and `5' `8' and `0'
CANCEL
105