APRILIA QUASAR 125 2003 Workshop Manual page 47

PERIODIC MAINTENANCE
f
b
MAS
ODO
DST
c
AVS
TM
d
e
2
3
2
- 22 -
00
Speed function (a)
The speed function is automatically enabled upon battery installation.
a
ODO function (b)
The ODO function indicates the total distance covered by the vehicle.
KM/H The counter will be automatically reset when reaching 10,000 Km.
NOTE
will be deleted.
DST function (c)
The DST function indicates the partial distance covered by the vehicle.
The counter will be automatically reset when reaching 1,000 Km.
To manually reset counter, press push buttons (1) and (2) at the same time.
AVS function (d)
The AVS function indicates the trip average speed.
To reset the stored speed value, press push buttons (1) and (2) at the same
time.
TM function (e)
The TM function indicates the time vehicle is being used.
The counter will be automatically reset when reaching 12 hours.
To manually reset counter, press push buttons (1) and (2) at the same time.
MAS function (f)
The MAS function indicates the maximum speed.
To manually reset counter, push buttons (1) and (2) at the same time.
1
Installing battery
Using a coin, undo the battery cover (3).
Install battery (3 V) inside its compartment. Take care to position positive pole
(+) pointing upwards and negative pole (-) pointing downwards.
Once finished, close battery cover (3) again.
When the multifunction computer battery is removed, all stored values
QUASAR 125-180
Release 00/2003 - 09