Table of Contents
Advertisement
1 Chassis Description
Kit Contents
The SC5000 chassis subassembly kit includes this Product Guide; a power cord; two chassis feet;
and a box that includes six 5.25-inch external drive rails and mounting screws (Figure 1, B),
mounting screws for the chassis feet (Figure 1, D), mounting screws for the server board
(Figure 1, C), and mounting screws for IDE drives (Figure 1, A).
Feature Summary
Table 1.
Feature Summary
Feature
Drive Bays
Expansion slot covers
Power supply
Cooling
A
B
Figure 1. Screw Description
A.
Flat head 6-32 x 5mm [.200]
B.
Flat head M3 x 5mm [.200]
C. Hex head 6-32 x 6mm [.256]
D. Round head M4 x 8mm [.315]
Description
One 3.5-inch diskette drive bay, accessible from front.
Three 5.25-inch wide bays that are externally accessible, designed to hold
half-height standard removable media devices; two of the bays can be
converted into a single full-height bay.
Five 5.25-inch wide bays that are not externally accessible, designed to hold
half-height IDE drives.
An optional hot-swap bay for 3.5-inch hard disk drives: space for up to five
1-inch high, SCA2 hard drives.
Up to seven expansion slots can be used; every slot that does not have an
add-in board installed must have a slot cover installed.
300 watt power factor correction (PFC) power supply, integrated cooling fan.
Detachable AC power cord.
Optional 350 watt hot-swap redundant 1+1 PFC power supply.
Two system fans inside the chassis and one power supply fan provide cooling
and airflow. The optional 350 watt power supply has two fans.
C
D
OM09086
7
Advertisement
Table of Contents
