Chassis Description; What Your Kit Includes; Items You Must Purchase Separately - Intel SE7501WV2 - Server Chassis - SR2300 Product Manual

1 Chassis Description

®
Your Intel Server Chassis SR2300 kit is designed to support the Intel
or SE7501WV2. The fan module and riser cards are installed for shipment, but you must remove
and reinstall them when you install the server board.

What Your Kit Includes

Your kit includes the following components:
2U rack-mount chassis featuring:
Four hard drive bays with carriers and two bays with plugs
Two hard drive bay plugs
One bay for an optional DVD/CD-ROM drive/FDD module (comes with filler panel and
plug)
One bay for optional tape drive (comes with carrier and filler panel)
One 480 W SSI PFC non-redundant power supply or a 500 W 1+0 SSI PFC redundant power
supply with one module and one blank
Two PCI riser cards for use with the Intel Server Board SE7500WV2 or SE7501WV2
Three system fans
One internal USB cable, (connecting server board to front panel board)
One internal flex circuit cable, 100-pin (connecting server board to backplane board)
One internal SCSI cable (connecting server board to backplane board)
One internal front panel cable, 34-pin (connecting front panel board to backplane board)
One Resource CD-ROM containing drivers, utilities, and product guide
Mounting screws (server board)
Front, mid, or 4-post rack mounting kit

Items You Must Purchase Separately

The following components must be purchased separately:
Front bezel (optional)
Intel Server Board SE7500WV2 or SE7501WV2 (SCSI)
Minimum of one Intel
Registered ECC DDR RAM memory DIMMs
SCSI hard disk drives (HDD)
Slimline DVD/CD-ROM drive/floppy disk drive module (optional)
PCI add-in cards
Hard drive carriers (over the four supplied)
500 W power supply module for redundancy
System fan for redundancy
Other peripheral devices
Power cord (If not included in the kit. This kit ships with a power cord in North America only.)
®
Xeon™ processor
®
Server Board SE7500WV2
7