Kubota K008-3 Workshop Manual page 296

Unload valve structural drawing
(2)Super change valve
Super change valve assembly drawing
4) Cautions in assembly
Unload valve inside (oil passage) should be
especially clean.
When assembling the valve, apply antirust LPS-
32 or equivalent to the part which comes in con-
tact with spools provided at both sides of
machine.
5) Hydraulic oil circuit diagram
Assembly procedure
1) Tightening torque of hex. socket head bolt (M8
x 1.25):
29.4 N·m (3.0 kgf·m)
2) Parts list
No. Part Name
010 Valve assembly (SC)
020 Hex. socket head bolt
030 Bracket
040 Bolt
050 Lever (SC)
060 Head bolt
070 Snap pin
080 Head bolt
090 Snap pin
100 Lever grip
110 O-ring
IV-S-40
Courtesy of Machine.Market