Kubota K008-3 Workshop Manual page 100

K008-3, U10-3
The following engine WSM has been compiled after minor changing of original 68
mm stroke series engine WSM by eliminating some pages which doesn't apply to
construction machinery model of K008-3, U10-3 series.
Still some pages contain common specifications on -68 mm stroke series engine.
Therefore, some data may differ from the engine mounted on construction machinery.
In that case, please come to B. Engine specifications for construction machinary.
************************************************************************************************
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of KUBOTA Diesel Engine
03-M Series. It is divided into two parts, "Mechanism" and "Servicing" for each sec-
tion.
Mechanism
Information on the Features and New Mechanisms are described. This informa-
tion should be understood before proceeding with troubleshooting, disassembling and
servicing.
Servicing
The heading "General" includes general precautions, check and maintenance and
special tools. There are troubleshooting, checking and adjusting, disassembling and
assembling, and servicing which cover procedures, precautions, factory specifications
and allowable limits.
All information illustrations and specifications contained in this manual are based
on the latest product information available at the time of publication. The right is
reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, illustration being used, have not
been specified as one model.
c
KUBOTA Corporation Construction machinery Division
TO THE READER
III-M-2
April 2003
Courtesy of Machine.Market