Removing And Installing The Engine Compartment Cover Under The Operator's Seat; Removing And Installing The Cover Under The Operator's Seat; Replacing The Bucket - Kubota U17-3a Operating Instructions Manual

Removing and installing the engine compartment cover under the operator's
seat

Tilt the operator's seat (page 74).

Remove the fastening screws (1) and remove the engine
compartment cover (2).

To mount, attach the engine compartment cover and tighten
the fastening screws.

Removing and installing the cover under the operator's seat


Tilt the operator's seat (page 74).

Remove both wing screws (1) and the cover (2).

To mount, attach the cover and tighten the wing screws.

Replacing the bucket

When replacing the bucket, make sure to wear an eye protection, a helmet and protective gloves.
During attaching and detaching, chippings and burrs may occur at the bolts or bushings. These
may cause severe injuries.
Never use your fingers for the alignment of the components (link, bucket, arm). The components
may sever your fingers by uncontrolled movements.
76
Operation