Swivel Motor Block Performance; Traveling Motor Block Performance - Kubota K008-3 Workshop Manual

c. Swivel motor block performance
d. Traveling motor block performance
1. Locate the machine on the 15 deg. slope.
2. The front position is of arm dump and bucket
crowd. Keep the boom so that the boom end pin is
alignedwith the bucket pin.
3. Mark the outer ring of swivel bearing and truck
frame.
4. Unlock the safety lock lever, and measure the one
minute shifting distance between them with engine
idling rpm.
5. Load on the bucket should be as follows.
Brake
applied
Reference
Value
Brake
released
6. Hydraulic oil temperature must be 50 ± 5°C, 122 ±
41°F.
1. Park the machine on a 20deg. slope. Keep front at
traveling position.
2. Put marks on the truck frame and the crawler.
3. Measure 10 minutes slip-distance without engine
running.
4. Hydraulic oil tempreture must be 50 ± 5°C, 122 ±
41°F.
Reference Value
IV-S-24
KE, KDG, KUK KTC, KCL, KTA
version
5 mm / min
K008-3 5 mm / min
0.2 in. / min
30 mm / min
U10-3
1.18 in. / min
300 mm/10 min
0.98 ft/10 min
Courtesy of Machine.Market
version
-