Kubota K008-3 Workshop Manual page 337

End cover assembly disassembling procedure
[Caution]
When clamping the assembly by vice etc., use care not to pinch the copper plate and give damage to the
machine finished surface. Do not tighten it excessively.
9) Take out the spacer (21).
10) Fix the wheel and remove four M8 bolts (28) by
which the end cover assembly is mounted.
48.1 ~ 55.9 N·m (4.9 ~ 5.7 kgf·m)
11) Remove the plug (V11), and then remove the
spring (V9), washer (V13) and spool (V7).
Do not use spanner but use socket wrench.
IV-S-81
Courtesy of Machine.Market