Kubota K008-3 Workshop Manual page 341

5) Insert the Counter-balance poppet (V8) and
spring (V10) into the spool (V7), and tighten the
plug (V12).
• Apply loctite No.242 to threads.
• Tightening torque: 3 kgf·m
6) Insert the spool (V7), washer (V13) and spring
(V9) (Mounting direction is free) one by one,
and tighten the plug (V11).
• Tightening torque: 15 kgf·m
Do not use spanner but use socket wrench.
7) Fix the wheel and tighten the end cover assem-
bly with four M8 bolts (28).
• Tightening torque: 3.5 kgf·m
IV-S-85
Courtesy of Machine.Market