Wheel Motor; Wheel Motor (Made By Eaton Equipment Co. Ltd.) - Kubota K008-3 Workshop Manual

c. Wheel Motor (made by Eaton Equipment Co. Ltd.)
(1)Wheel motor disassembly and assembly procedure
[1] Introduction
This instruction manual describes the handling method with a view to prevent possible trouble in handling
and maintain the full performance for long period of time when you use this product as mini-shovel travel
motor.
Please refer to the attached documents.
Sectional and structural drawing AZ7275B
[2] Precautions for handling
2.1 Check
Check the following points before mounting the motor.
a) Isn't there any part which was broken during transportation?
b) Isn't there any looseness at connections?
2.2 Checking before and after operation
a) Isn't there any looseness at connections?
b) Isn't there any oil leak?
Isn't there any abnormal noise, vibration or heating?
[3] Maintenance and check
Unless any trouble is found in operation, check only the following points.
a) Check bolts for looseness.
b) Check parts for oil leak.
[4] Tools for disassembly and assembly
The table below shows the tools necessary for disassembly and assembly of motor. Prepare them before
work.
Name of Tool
Torque wrench
Wire brush
Screwdriver
Screw lock agent
Gear oil
Grease
Hexagon socket wrench
Hexagon wrench
Socket wrench
Remarks
Capacity:3, 3.5, 5.7 kgf·m
LOCTITE No.242
SHELL SPIRAX EP90
Width across flats 8, 6, 4
Width across flats 2
Width across flats 36, 22
IV-S-76
Courtesy of Machine.Market