If the program is interrupted (power failure, manual intervention,
thermostat intervention, etc...) during the prewashing phase the
programmer will return to its initial position and will automatically
repeat the entire burner ignition phase.
CAUTION / WARNING
The selection of the nozzles in relation to the desired total
flow rate (2 nozzles in operation) must be made taking into
consideration the flow rate values that correspond to the
diesel operating pressure of 12 bar. Replacing the nozzles it
is possible to vary greatly the relationship between the first
and the second stage.
10
2
1
ON / OFF main switch.
2
Thermostatic line switch
3
Display
4
Unlock or RESET button
5
Fuse.
9
Fuel fill button
10 Fuel selector switch
11 Programming keypad
19 / 44
0006160028_201510
3
11
5
1
4
9
ENGLISH