Transmission, Installing - Volkswagen Golf 2015 Repair Manual

3.2

Transmission, Installing

Caution
This procedure contains mandatory replaceable parts. Refer
to component overview prior to starting procedure.
Mandatory Replacement Parts
♦ Bolts - Engine to Transmission Connecting
♦ Bolts - Subframe Mount
♦ Lockwashers - Selector Mechanism Cable
Install in reverse order of removal. Note the following:
Note
Refer to Transmission, Removing
♦
⇒ 3.1 Transmission, Removing , page 72
cial tools needed.
After installing a »new« transmission, reprogram the immobil‐
♦
izer.
Note
Always replace the needle bearing -arrow- after separating the
♦
engine and transmission.
If the needle bearing in the crankshaft is damaged, the gears
♦
will no longer shift correctly.
– Replace the needle bearing in the crankshaft. Refer to ⇒ Rep.
Gr. 13 ; Crankshaft; Needle Bearing in Crankshaft, Replacing .
– Transmission pins (not splines) must also be lightly lubricated.
– Make sure both alignment sleeves between the engine and
the transmission are correctly seated.
– Make sure the intermediate plate fits correctly.
Golf 2015 ➤ , Golf Variant 2015 ➤
Direct Shift Gearbox - Edition 09.2015
for a list of the spe‐
3. Transmission, Removing and Installing
91