Golf 2015 ➤ , Golf Variant 2015 ➤
Direct Shift Gearbox - Edition 09.2015
– Clean the Clutch Cover Plate Guide Sleeve - T10302- before
using, do not use any scratched sleeves
– Place the sleeve on a level surface.
The center seal on the new clutch end cover must now be per‐
formed :
– Guide the clutch end cover horizontally and evenly over the
whole sleeve in direction of -arrow-. This brings the sealing lip
into its installed position.
– Remove the sleeve upward out of the clutch end cover and
place it on the end of the dual clutch shaft.
– Guide the cover horizontally over the sleeve and press it even‐
ly onto its seat.
Caution
The clutch end cover may not be exposed to direct hammer
hits. If the cover is hit in any way, leakage will definitely occur.
The cover can be pried out of its seat using a screwdriver to install
the new circlip -arrow-.
– Install the new circlip.
18
Rep. Gr.30 - Clutch