Volkswagen Golf 2015 Repair Manual page 28

Golf 2015 ➤ , Golf Variant 2015 ➤
Direct Shift Gearbox - Edition 09.2015
– Remove the drive plate from the installed clutch in the direction
of -arrows-, if necessary, use a screwdriver to carefully pry it
out of the teeth of the outer clutch pack carrier.
– Move the drive plate to the side.
Caution
Do not remove or lift the inner clutch pack carrier, under any
circumstances. The clutch discs could rotate themselves.
Identify the Circlip for the DSG
– Select the 2 mm thick ring from the circlips delivered and install
it -arrow-.
Note
This circlip is temporary installed for the measurement of the axial
play.
First Measurement:
• The Clutch Retaining Bar - T10303- remains installed.
– Install the Dial Gauge Holder - VW387- on the transmission
flange.
– Place the -dial gauge button- on input shaft.
– Adjust the -dial gauge- pretension to 0 .
– Raise the dual clutch up as far as the stop and note the meas‐
urement result.
Second Measurement:
• The Clutch Retaining Bar - T10303- remains installed.
24
Rep. Gr.30 - Clutch
®
Clutch