Volkswagen Golf 2015 Repair Manual page 58

Golf 2015 ➤ , Golf Variant 2015 ➤
Direct Shift Gearbox - Edition 09.2015
There are two ways to move the button into the installation posi‐
tion, with or without assembly fastener. The following de‐
scribes both ways.
Moving the Handle with an Assembly Fastener into the Instal‐
lation Position:
Make sure the assembly fastener has an eye -arrow- at the front.
Other assembly fasteners cannot be used.
– Press the button and push the assembly fastener (with the
eye) -arrow- all the way in until it latches into place. Then re‐
lease the button. The button locks into the installation position
when the assembly fastener is pulled out.
Moving the Handle without an Assembly Fastener into the In‐
stallation Position:
– Remove the trim -A- from the handle.
54
Rep. Gr.34 - Controls, Housing