Unpacking - Huawei UPS5000-S User Manual

UPS5000-S-1200 kVA
User Manual
Circuit Breaker Name
a: recommended model when the short-circuit current where the circuit breaker
is located is less than 65 kA

3.1.4 Unpacking

Context
● Only trained personnel are allowed to move the UPS. Use a pallet truck to
● To prevent the UPS from falling over, secure it to an electric pallet truck using
● To prevent shocks or falls, move the UPS gently. After placing the UPS in the
● If the UPS installation environment is in poor condition and the UPS will be
Procedure
Step 1 Use a pallet truck to transport the UPS to the installation position.
Step 2 Remove the UPS outer packing.
Step 3 Remove the bolts that secure the UPS to the pallet and remove the UPS from the
pallet.
Issue 08 (2020-12-15)
NO TE
● The upstream input circuit breakers recommended in the table are for reference only.
● If multiple loads are connected, specifications for branch circuit breakers must not
exceed the recommended specifications.
● The circuit breaker selection principle is to protect loads and cables, and the cascading
principle is to realize specific protection.
NO TICE
transport the UPS box secured to a wooden support to the installation position.
ropes before moving it.
installation position, unpack it with care to prevent scratches. Keep the UPS
steady during unpacking.
stored for a long time after it is unpacked, wrap the UPS with the original
plastic coat to prevent dust.
Copyright © Huawei Technologies Co., Ltd.
a
Specifications
3 Installation
54