Huawei UPS5000-S User Manual page 177

1200 kva
Hide thumbs Also See for UPS5000-S:
Table of Contents

Advertisement

UPS5000-S-1200 kVA
User Manual
When you add a job, five sending methods are available. The latter three methods
can take effect only when the event condition is still true after the specified
seconds.
RCCMD Certificate Management
● After replacing the certificate on the MDU WebUI, replace the certificate on the
● The default certificate provided by the system has expired. Replace the
After SSL Encrypted Transmission is set to Enable, RCCMD Certificate
Management is displayed. The RCCMD certificate, RCCMD certificate key, and
RCCMD CA certificate can be uploaded, as shown in
certificate or RCCMD CA certificate is not uploaded, the default certificate
provided by the system is used for communication. After the certificate is
uploaded successfully, click Submit. The WebUI of the MDU will restart, and the
uploaded certificate will be used for communication.
Issue 08 (2020-12-15)
Signal Name
#CNT_PF
#CNT_BL
#INPHASES
#OUTPHASES
Immediately, once: After the event happens, the job will be sent to the
RCCMD client immediately.
Scheduled in X seconds: After the event happens, the job will be sent to the
RCCMD client once in X seconds. No matter whether the event disappears or
not within X seconds, the job will be sent.
After X seconds, repeat all Y Specify the interval: After the event happens,
the job will be sent once in X seconds, and then be sent once every Y seconds.
After X seconds on Battery: After the battery mode is activated for X
seconds, the job will be sent to the RCCMD client once.
At X seconds remaining time: When the battery backup time has only X
seconds left, the job will be sent to the RCCMD client once.
NO TE
X and Y are variables and stand for time.
NO TICE
RCCMD client too. Otherwise, communication will fail. For details about the
replacing method, see the RCCMD user manual.
certificate immediately.
Copyright © Huawei Technologies Co., Ltd.
Description
Power supply failure
times
Low battery voltage
times
Input phases
Output phases
4 User Interface
Unit in the UPS
N/A
N/A
N/A
N/A
Figure
4-70. If the RCCMD
168

Advertisement

Table of Contents
loading

Table of Contents