Powering On The Instrument - Molecular Devices ImageXpress Pico Installation Manual

Powering On the Instrument

To power on the instrument:
1. Ensure the Ethernet cable is connected properly:
2. Press the Power button on the front of the instrument.
When the status light on the power button is green, the instrument is fully powered on.
5063666 B
For a standalone configuration, where the instrument is connected directly to the
host computer, connect the Ethernet cable to the LAN1 port on the back of the
instrument.
For a network configuration or server configuration, where the instrument is
connected to a network, connect the Ethernet to the LAN2 port on the back of the
instrument.
CAUTION! The network connections between the host computer, imaging device,
remote clients, and external computers require that all firewalls and routers be
configured to allow data transfer between all applicable ports. Without
communication across these ports, the instrument cannot connect to the
software. See the CellReporterXpress IT Configuration Guide for details.
Chapter 2: Setting Up the ImageXpress Pico System
29