Placing The Instrument; Removing The Transport Lock - Molecular Devices ImageXpress Pico Installation Manual

Automated cell imaging system

Hide thumbs Also See for ImageXpress Pico:

Table of Contents

ImageXpress Pico Personal Imaging System Installation Guide

Placing the Instrument

Consider the following when setting up the instrument:

Set the instrument on a stable, dry, flat surface.

Avoid setting up the instrument near any sources of vibration, such as a centrifuge.

During installation, you will need to access the back of the instrument to connect the

cables.

After installation, allow at least 20 cm (7.9 in.) clearance on all sides of the instrument.

Remove any tape and the foam transport lock that secures the sample (X-Y) stage the top of

the instrument.

CAUTION! Retain the shipping box and all packaging materials for future transport

needs.

5063666 B

Table of Contents

Do you have a question about the ImageXpress Pico and is the answer not in the manual?