Table of Contents
Advertisement
Figure 66. Removing the rear drive cage
Next steps
1.
Replace the rear drive
Installing the rear drive cage
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the guide and slot on the rear drive module with the slot and guide on the system.
2. Insert the rear drive module on top of the Riser 2a.
3. Tighten the captive screws to secure the rear drive cage to the system.
cage.
Safety
Before working inside your
instructions.
system.
Installing and removing system components
67
Advertisement
Table of Contents
