Removing The Expansion Card Risers - Dell EMC PowerEdge R7525 Installation And Service Manual

Table 30. Config12-1: R1D+R2A+R3A+R4A(FL)
Agile Description
KIT,CRD,NVME,3.2,HHHL,PM
1725B
KIT,CRD,NVME,6.4,HHHL,PM
1725B
KIT,CRD,NVME,1.6,HHHL,PM
1735
KIT,CRD,NVME,1.6,HHHL,PM
1735,O
KIT,CRD,NVME,3.2,HHHL,PM
1735
KIT,CRD,NVME,3.2,HHHL,PM
1735,O
KIT,CRD,NVME,6.4,HHHL,PM
1735
KIT,CRD,NVME,6.4,HHHL,PM
1735,O
KIT,CRD,NVME,750GB,HHHL,
P4800X

Removing the expansion card risers

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Disconnect any cables that are connected to the expansion card.
Steps
1. For Riser 1, loosen the captive screws on the riser.
a. Press the blue release tab and holding the edges lift the expansion card riser from the riser connector on the system
board.
NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
118 Installing and removing system components
Supplier
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
INTEL
Safety instructions.
Before working inside your
Category
PCIE SSD
PCIE SSD
PCIE SSD
PCIE SSD
PCIE SSD
PCIE SSD
PCIE SSD
PCIE SSD
PCIE SSD
system.
Card Priority
12300
12400
12500
12600
12700
12800
12900
13000
13100