Table of Contents
Advertisement
Table 3. Left control panel
Item
Indicator, button, or
connector
NOTE:
For more information about the indicator codes, see the
Right control panel view
Figure 8. Right control panel view
Table 4. Right control panel (continued)
Item Indicator or button
1
VGA port
iDRAC Direct port (Micro-AB
2
USB)
USB 2.0-compliant port
3
Power button
4
12
System overview
Icon
Description
the virtual Keyboard, Video, and Mouse (KVM) viewer and
virtual Kernel-based Virtual Machine (KVM), on a supported
mobile device. For more information, see the Integrated Dell
Remote Access Controller User's Guide at
poweredgemanuals
Icon
System diagnostics and indicator codes
Description
Enables you to connect a display device to the
system. For more information, see the
poweredgemanuals
section.
The iDRAC Direct port (Micro-AB USB) enables you to
access the iDRAC Direct Micro-AB features. For more
information, see the iDRAC User's Guide available at
https://www.dell.com/idracmanuals
NOTE:
You can configure iDRAC Direct by using
a USB to micro USB (type AB) cable, which
you can connect to your laptop or tablet. Cable
length should not exceed 3 feet (0.91 meters).
Performance could be affected by cable quality.
The USB port is a 4-pin connector and 2.0-compliant.
This port enables you to connect USB devices to the
system.
Indicates if the system is powered on or off. Press the
power button to manually power on or off the system.
www.dell.com/
section.
www.dell.com/
.
Advertisement
Table of Contents
