Figure 71. Installing the rear mounting front PERC module
Next steps
1.
Install the drive
backplane.
2. If removed,
install the air
3.
Install the drive backplane
4. Follow the procedure listed in
System memory
System memory guidelines
The PowerEdge R7525 system supports DDR4 registered DIMMs (RDIMMs) and Load Reduced DIMM (LRDIMMs). System
memory holds the instructions that are started by the processor.
Your system memory is organized into eight channels per processor (two memory sockets per channel),16 memory sockets per
processor and 32 memory sockets per system.
72
Installing and removing system components
shroud.
cover.
After working inside your
system.