Installation is reverse order of removal
to the following steps.
the
attention
Install the two dowel pins
housing.
and
onto the drive-
Do not re-use the gasket once removed.
Always use new parts.
2. Apply the Water Resistant Grease to the driveshaft
99000-25161: SUZUKI WATER
3. Apply the Water Resistant
driveshaft oil seal.
to the seal
99000-25161:
WATER RESISTANT
4. Install the oil seal protector
and
the bolt
applying the Thread Lock to the bolt.
99000-32050: THREAD
"1342"
5. Install the power unit to the lower cover, then
tour
bolts to the specified
Lower cover bolt: 8 N·m
6.0