7·2
MID UNIT
DRIVESHAFT· · HOUSING/SWIVEL
BRACKET/CLAMP BRACKET
DISASSEMBLY
Remove the power unit. (See page 6-2.)
Remove th e lower unit. (See page 8-2 .)
Remove the water tube
CD
with the grommet upside.
Remove the spring pin @ and th e tilt lock wing nut @.
Remove the tilt lock spacer @.
Remove the swivel shaft nut@ and swivel shaft washer(/) .
Remove the port side clamp bracket
®
and tilt friction washer
® .