Suzuki DF2.5 Service Manual page 28

2·10 P.ERIODIC MAINTENANCE
INSTALLATION
Installation is reverse order of removal with the special attention
to the following steps.
• Tighten the four cylinder head cover bolts diagonally to the
specified torque.
Cylinder head cover bolt: 7 N·m (0. 7 kg-m, 5.0 lb-ft)
fCAUTIONI
- ' _ _ _ _ .J
Do not re-use the removed gasket. Always use a new
• Make sure that the cylinder head cover gasket is installed cor-
rectly.