2. lnstaH the gasket and breather plate (2) to the cylinder block
and secure with th e three screws.
3. Install the thermostat Q).
4. Apply sealant to both surfaces of thermostat cover gasket
(as shown with hatched lines).
SUZUKI
SILICONE SEAL
5. Instal! the gasket and the thermostat cove r @ to the cylinder
block and secure with the four bolts.
CYLINDER HEAD
Install the cylinder head . (See page 6-8 and 6-9.)
POWER UNIT
In stall the power unit (See page 6-4 to 6-6.)
POWERUNIT
6-. 3 7