Suzuki DF2.5 Service Manual page 112

CLAMP BRACKETITHRUST B LOCK
• Apply the Water Resistant Grease to the clamp bracket
through swivel shaft bolt hole.
" Instal l the clamp bracket starboard side
G) ,
the tilt friction
washer@ and the swivel shaft bolt @.
SUZUKI WATER RESISTANT GREASE
.. Install the thrust block® with the lower thrust mount and the
tilt lock bolt@ .
" Install the tilt friction washer
®
and the clamp bracket port
side (f).
" Install the tilt friction washer@ and the swivel shaft nut®.
" Tighten the swivel shaft nut to th e specified torque .
shaft nut: 10 N·m (1.0 kg-m, 7.0 lb-ft)
$
Apply the Thread Lock to the swivel shaft nut.
99000-32050: THREAD LOCK "1342"
• install the tilt lock spacer ®land the tilt lock wing nut® .
.. Install the tilt lock pin ® to the tilt lock bolt.
MID UNIT 7·9