Suzuki DF2.5 Service Manual page 48

4-6 FUEL SYSTEM
INSTALLATION
Installation is reverse order of removal with the special attention
to the following steps.
,CAUTION!
Do not re-use the removed gasket. Always use a new
gasket.
• Tighten the carburetor mounting bolts to the specified torque.
(!]carburetor mounting bolt: 10 N·m (1.0 kg-m, 7.0 lb-ft)
Throttle control cable installation and adjustment
1. Fully close the throttle control grip.
2. Turn the idle adjusting screw counterclockwise until the
screw do not touch the stopper
3. Insert the throttle control inner cable @ into the linkage hole.
4. While pulling the cable @, tighten the screw @ in order to
secure the cable.
5. Adjust the idle speed. (See page 2-11 and 2-12.)