Engine Serial Number; Mid Unit; Swivel Bracket; Tilt Lock Nut - Suzuki DF2.5 Service Manual

ENGINE SERIAL NUMBER

The engine serial number starts from the following six-figure
number located after the model pre-fix.

MID UNIT

SWIVEL BRACKET

The swivel bracket assembly has been changed from right-left
division type to front-rear division type.
Interchangeability:
The early swivel bracket is interchangeable with late one as an
assembly.
1. Swivel bracket
2. Swivel bracket cover

TILT LOCK NUT

The tilt lock bolt tightening nut has been changed from a wing
nut to two (2) hexagon nuts (a hexagon nut plus a self-locking
nut).
In accordance with this change, the spring pin pressed into the
tilt lock bolt has been eliminated.
1. Tilt lock bolt
2. Wing nut ('07 model)
3. Pin ('07 model)
3. Swivel bracket assembly
4. Securing bolt (4 pieces)
4. Nut ('08 model)
5. Nut ('08 model)
DF2.5 "K8" ('08) MODEL 9
MODEL PRE-FIX
Serial number
'08 model parts
2
1
1
880001
4
3
2
3
4
5