Suzuki DF2.5 Service Manual page 41

REMOVAL AND INSTALLATION
@
10 N·m (1.0 kg-m, 7.0 lb-ft)
(1
G)
(
4.5kg-m)
32.5 lb-ft
fj; '
;--,-._
____ __
NOTE:
Clean the flywheel and crankshaft
mating surfaces with cleaning solvent.
REMOVAL
Prior to removing the electrical parts, disconnect the
spark plug cap from the spark plug.
1. Remove the recoil starter. (See page 5-2.)
2. Disconnect the emergency/engine stop switch lead wire
from the igniter unit.
3. Remove the two bolts securing the igniter unit.
4. Loosen the flywheel nut using the special tools.
NOTE:
Do not remove flywheel nut at this time.
This nut prevents damage to crankshaft when using flywheel
remover tools.
1Ri0h
09930-40113: Flywheel holder
09930-40120: Rotor holder attachment
IGNITION AND ELECTRICAL 3-7
Nut (1)
Starter pulley (1)
@
Flywheel magneto ( 1 )
@Key (1)
@Bolt (2)
@ Igniter unit ( 1)
({) Spark plug cap (1)