Dds Changeover Docking Station - Atmos C 451 Operating Instructions Manual

5.0 Options
Fig. 30.
Fig. 31.
Fig. 32.
Fig. 33.
5.3

DDS changeover docking station

Max load on station: 15 kg! Max load on station: 15 kg!
Damage on device at higher weight! Damage on device at higher weight!

The DDS changeover docking station for 2 collection jars
with changeover switch and direct docking may be used
on the system trolley.

Installation is performed in accordance with the attached
installation instructions.

Connect the vacuum hose with coupling to the bottom
connector of the suction unit as shown in section 3.2.
 The adapter with standard rail is required to use the fl oor
mounted vacuum connection. This adapter seals the top
vacuum connection and provides the opportunity for han-
ging accessories on the standard rail thus available.

Install the adapter with standard rail on the suction unit's
securing device as described in the attached installation
instructions.

The collection jars are inserted into the DDS changeover
docking station vertically from above as in the unit itself.

The changeover lever serves to switch the vacuum to the
collection jar towards which the lever points.

To remove or insert a collection jar, switch the changeover
lever towards the collection jar that is not being replaced.
15