Safety Instructions And Approvals; Safety Instructions - Siemens SIMATIC HMI KP Series Operating Instructions Manual

Safety instructions and approvals

2.1

Safety Instructions

Injury or material damage
If you do not follow precisely the safety guidelines and manuals in this handbook, this may
result in sources of danger and make safety functions ineffective. This can result in
personal injuries or material damage.
Follow the safety guidelines and instructions precisely.
Observe the safety and accident prevention instructions applicable to your application in
addition to the safety instructions given in this manual.
Project security
Injury or material damage
The configuration engineer for a system PLC must take precautions so that an interrupted
program can be restarted normally after voltage dips or power failures.
A dangerous operating state must not occur during the entire process of the control
program, also during troubleshooting - also not in the short-run.
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
WARNING
WARNING
2
19