Sis Command And Response Table - Extron electronics DVS 605 Series User Manual

Hide thumbs Also See for DVS 605 Series:
Table of Contents

Advertisement

SIS Command and Response Table

Command
ASCII Command
(host to scaler
Input selection
Video and audio
X!
Video
X!&
Audio
X!$
View video input
&
$
View audio input
View current input
!
NOTES: See
Video only and audio only switching (breakaway) rules
Audio breakaway ($) is not allowed TO an input configured for any digital audio format.
Video breakaway (&) is not allowed FROM an input configured for any digital audio format.
Attempting either of these invalid modes gives an E17 error.
Audio breakaway is always allowed back TO the current video input.
When in PIP mode, audio breakaway is not supported. Audio follows either the main window or the PIP window, and is
selectable via SIS command.
X!
= Input number: 1 through 5
KEY:
Picture in Picture
NOTE:
HDMI input 5 cannot be used for PIP.
True seamless switching is not available with PIP mode enabled (see
further details).
PIP on or off
PIP on
EX2&PIP}
PIP off
E0PIP}
View PIP selection
EPIP}
X2&
= PIP window input selection: 0 to 4 (0 = off)
KEY:
Swap main or PIP windows
%
Swap
Input video format
Set video format
X!*X#\
View set format
X!\
View detected format
X!*\
Verbose mode 2/3 response
KEY:
X!
= Input number: 1 through 5
X#
= Input video format: 0 = No signal detected, 1 = RGB, 2 = YUV auto, 3 = RGBcvS, 4 = S-video, 5 = Composite,
6 = DVI/HDMI (only available for inputs 3, 4, and 5), 7 = Auto detect (default for inputs 1 and 2)
Response
)
(scaler to host
In X!•All]
!
In X!•RGB]
In X!•Aud]
X!]
X!]
X!]
PipX2&]
Pip00]
X2&]
Tke]
TypX!*X#]
X#]
X#]
TypX!*X#]
Additional Description
)
Select video and audio from input
Select video from input source
Select audio from input source
View current video input
View current audio input
View selected input
on page 97 for details
Picture-in-Picture (PIP) Mode
Turn on PIP and display input
2 digit response.
Turn PIP off.
View PIP selection
01
example,
).
Swap between main and PIP
X!
Set input
to format
View set video format of input
View actual video format auto-detected on input
X!
.
DVS 605 • SIS Communication and Control
X!.
X!.
X!.
X!.
X!.
X!
(video only).
on page 29 for
X2&.
X2&
is a
(X2&
is a 2 digit response, for
window.
X#.
X!.
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs 605Dvs 605 aDvs 605 dDvs 605 ad

Table of Contents