Symbol Definitions - Extron electronics DVS 605 Series User Manual

Symbol Definitions

• =
Space
] =
Carriage return with line feed
| or
} = Carriage return with no line feed
E or W
= Escape
=
14, 24, 28 Superscripts indicate the error message displayed if the command is entered
incorrectly or with invalid parameters (see
SIS command definitions
X! =
=
X@
=
X#
=
X$
=
X%
=
X^
=
X&
=
X*
=
X(
=
X1)
=
X1!
=
X1@
=
X1#
X1$ =
X1% =
X1^ =
=
X1&
Error response references
Input selection, 1-5, (0 = current input — 0 is valid only for Input Config settings:
0 = main when PIP is disabled, 0 = PIP when PIP is enabled)
Output selection:
0 = All outputs (default)
1 = Analog (VGA, YUVp, HDTV)
Input video format:
0 = No signal detected (valid only for detected input format query,
such as X!*\ or "I")
1 = RGB 5 = Composite video
2 = YUV auto 6 = DVI or HDMI (available only for inputs 3, 4, and 5)
3 = RGBcvS 7 = Auto detect (default for inputs 1 and 2)
4 = S-video
Horizontal or vertical start — 0 to 255 (default midpoint = 128)
Pixel phase — 0 to 63 (default = 31)
Total pixels — ±512 of the default value
Active pixels — ±512 of the default value
Active lines — ±512 of the default value
Enable or disable:
0 = Off or disable
1 = On or enable
Input standard:
0 = No signal detected
1 = NTSC 3.85
2 = PAL
- = N/A (occurs when input is an active RBG, YUV auto
[but not NTSC/PAL], or HDMI signal.)
Internal temperature (in degrees Celsius)
Unit name is a text string of up to 24 characters drawn from the alphabet (
0-9
( ), and the minus sign or hyphen (
The last character must not be a minus. No blank or space characters permitted, and no
distinction is made between upper- and lowercase.
Horizontal and vertical frequencies (format is 3 digit with a single decimal and leading
zeros, for example, 075.3)
Text label/preset name: up to 16 characters
NOTE:
User and input presets saved without a name are saved with the default
names "User Preset xx" (for example, user preset 12) or "Input preset xxx" (for
example, Input preset 122).
Picture adjustment — 0 to 127 (default = 64)
Horizontal and vertical position, ±11000, with leading "+" or "-", such as -02040
Horizontal and vertical size, 10 to 11000
on the previous page).
2 = HDMI
3 = 3G/HD-SDI
3 = NTSC 4.43
4 = SECAM
-
). The first character must be an alpha character.
DVS 605 • SIS Communication and Control
A-Z
), digits
36